How to Configure a Stratum 1 GPS NTP Server - By: David Evans

The Network Time Protocol was originally developed over 25 years ago as a means of synchronising computers on the Internet. NTP is a suite of applications that provide synchronisation of time to an accurate timing reference. Originally developed for LinuxUNIX, NTP has since been rewritten for the Microsoft Windows operating systems. NTP allows a network time client to synchronise to within milliseconds of an accurate external time reference.

Combining an accurate external timing reference with the NTP application provides a highly accurate network timing device. This article describes how to utilise a low-cost GPS receiver in combination with the NTP software distribution to provide an accurate stratum 1 NTP server timing reference.

The NTP source code can be obtained from the NTP website and must be compiled on the local machine. The downloadable NTP tar file extracts to a directory where scripts are available to make compilation and configuration very straight-forward. Linux distributions such as Redhat and Debian install the NTP distribution by default. To set up and install a stratum 1 time server a stable external timing reference is required. The NTP software provides a large number of reference clock drivers that can be utilised to interface with a range of hardware timing references. Dedicated hardware timing devices can be prohibitively expensive. However, the popularity of GPS navigation devices has reduced the cost of GPS technology. Low-cost GPS receivers are now readily available from around $100. Many GPS receivers have a RS232 serial communications port, which can easily be connected to a PC. Many low-cost GPS devices use the NMEA protocol, which is a standard GPS protocol for providing location and timing information. The timing information can be utilised by the NTP software as an accurate timing reference to provide a stratum 1 NTP server.

The NTP software needs to be compiled with the NMEA reference clock driver to interface with the GPS receiver. Once compiled the application must be configured to utilise the correct serial port. When correctly installed and configured, the NTP application will provide your network with an accurate, stable timing reference.

A NTP server can be utilised to synchronise time on most computer operating systems and network infrastructure. Any network device that has an integrated NTP client can be configured to synchronise time with the NTP server. Generally, clients only need the IP address of the NTP server for synchronisation. With a NTP server, you can synchronise almost any device on your network.

About the Author

Dave Evans is an experienced technical author in the field of computer network timing. For a number of years Dave has provided an authoring service to the telecommunications industry. Click here to find out more about NTP server systems.

Article Directory Source: http://www.articlerich.com/profile/David-Evans/11034

Additional Articles From - Home | Computers