Few Basic Tips While Insulating Your Pipes and Attic for Winter - By: Jim Knight

Insulating your home or apartment is a must in today’s world. Insulating your home ensures less breakage to your home structure, appliances, utensils and other valuable belongings. The most important thing to do while insulating the household premises is to protect the attic and piping system.

When the winter is approaching, insulating the attic is a must as the HVAC system can cause the heated air to build up in your attic, which can cause damages like wood warping. Damage can be furthermore if the heated air gets mixed with condensation and moisture.

Insulation of attic is also very important for energy conservation and maintenance of warmth around the home during the winter season. Insulation is done by using a material which has millions of tiny air pockets. These pockets basically do the work of conserving or trapping the heat.

Fiberglass batts are considered the most common material used for insulation. There is an additional lair in the insulation material which helps in absorbing the moisture. This additional lair is made of a substance called R-value. The amount of R-value in the insulating material reduces when it absorbs moisture. Insulation comprising of higher R-value is considered most effective. These fiberglass insulation batts are very wide in length and can range up to 8 feet.

One thing one should do while insulating attics is not to insulate attic ceilings. During the winter attics face damages caused by frost. The moisture developing due to the frost can develop a dry rot on the attic roof, resulting in development of fungus, molds and mildew growth.

This phenomenon can also deplete the life span of the roof covering due to the entrapment of heat against the bottom of the roof. The only thing to do here is to insulate the areas under the roof. In order to avoid accumulation of moisture at the bottom of the roof a vapor barrier needs to be installed. If this is not done it can cause serious respiratory problems for the members in the household.

As we all know during the winter season the water turns into solid ice. This conversion can cause expansion which might cause the piping system to freeze. Waters can even soak into the walls of the house and cause problems. In order to avoid these problems and also the perils of bursts and leakages, insulation is required.

The first thing to do before insulating the piping system is to buy insulation material and proper plumbing supply. There are various kinds of insulation material available in the market but you should choose according to your requirement and budget.

Proper cleaning needs to follow after you’ve bought the supplies. Not cleaning the piping system will lead to accumulation of dirt, which might produce bacteria in the long run. Even improper cleaning might lead to flow of dirty water which may cause health hazards.

While insulating make sure all the portions of the pipe is properly covered as any space left might cause leakage in the near future. Corners and T-joints need to be given more attention compared to the other regions of the pipe while insulating.

About the Author

plano kleenairservices is a full service company, servicing all makes and models of air conditioning & heating systems.If you are experiencing any problems with your hvac, air conditioning or heating systems, don't hesitate give us a call immediately at (972) 527-3207. For more information on Air Conditioning Plano visit our website.

Article Directory Source: http://www.articlerich.com/profile/Jim-Knight/78197

Additional Articles From - Home | Home & family | Home improvement