Basic Facts About Bathroom Replacement - By: Charli Jhonson

If your bathroom is looking despondent or droopy then it is time to re-model or change it. Simple as it may sound there are a couple of factors you need to look in to while replacing the showers or the bathtub. Follow the tips given here and bathtub replacement or for that matter shower replacement will be a comparatively easy task.

The faucets allow water in the pipes to be used in a controlled manner. Generally the bathtubs and showers have either 2 valve or 3 valve faucets. They start leaking or dripping when washers become stiff and corroded. Water pressure also hastens this process. In older designs faucets there were rubber or neoprene washers. In the newer systems cartridge is used in place of washers which last longer and thereby giving greater returns on investment.

It is always necessary to purchase the correct materials for the bathtub replacement. Faucets come in many sizes and styles. Simply choosing the one that goes with your likes is not sufficient. When you need to replace a faucet it is necessary to take exact measurement of holes center to center. Style is optional but size is important and essential. Similarly when going for shower replacement, the size of shower-head is vital.

Also you need to have a correct set of tools to replace the showers and bathtub. There are various types of wrenches for plumbing jobs. For square or hex nuts open end wrenches are ideal as they have smooth jaws. If the pipes are coated with chrome and you do not want to scratch the surface then you can go for strap wrenches. If the pipe is of small diameter then you need to have a vise grip wrench. As you can see, the job being specialized requires specialized tools and not only this but also you need to be familiar with the usage of these tools. Generally 2 pipe wrenches are required for plumbing, one to hold and other to turn.

When installing bathtub faucets look for the faucet assembly behind walls. Generally builders would have provided a rear access panel in the back of tub. It is advisable to read the instruction manual while assembling faucets. This happens to be one of the most important steps in bathtub replacement. For shower replacement, exercise caution while removing the previous shower-head as any damage there can prove to be expensive to the extent of replacement of the entire pipe.

Here are some general steps to follow during bathtub replacement or shower replacement.First of all turn the water supply off. Next remove the faucet handle. Tap or pull gently. Overtime the handle may have got welded to stem. So do not force it. If it does not come out gently then use special handle puller. Now check the washer. If it is brittle or torn then be careful not to wrench it out by force. Take both the washer and the stem for examination. If they are rough then they too need to be replaced. Use a seat wrench to remove it.

When replacing you just need to assemble it all back. Grease the stem threads, washer and nut threads. Then slide them all back and tighten the nuts. Simple if you follow the steps. If not, the get professional help.

About the Author

Going for bathtub replacement or shower replacement is a tough task and you need to locate the right vendor. Make sure that you visit the website fixthehome.com as they have the perfect solution for any home repair jobs.

Article Directory Source: http://www.articlerich.com/profile/Charli-Jhonson/33808

Additional Articles From - Home | Home & family | Gardening