Automatic feed lock screw machine - By: Allan Michael Taylor

Automatic feeder according to the different transport of materials, can be divided into automatic feed lock screw machines, automatic transmission equipment, spare parts, auto parts assembly equipment, some of the steps involved in the process of tightening, so the equipment used by industrial workers into different types, thus extending the very many names.

Automatically send defined lock screw machine

Automatic feed screw lock screw machine, also known as automatic feeder, automatic screw screw machines, automatic locking screw machines, automatic screw fastening equipment, automatic screw machine to play, automatic feed screw screw machine, divided into two parts: the feeding mechanism and lock pay agencies. Usually vibrating plate or screw sorting through the splitter with screws and screw through the pipe will be sent to lock lips, by the electric or pneumatic screwdriver to screw insertion products.

Automatically send the lock screw machine classification

Automatically sent to the lock screw in accordance with operational procedures can be divided into the following categories:

1. Hand-held automatic get lock screw machine (automatic send lock screw machine)

Hand-held is hand automatic screw machine to play, as opposed to the traditional one hand and screw in one hand and electric or gas leases approved lock screw movement, hand-held automatic locking screw machine can send the liberation of a hand out, when a lock After automatically send the next one.

The advantages: Compared with the traditional to screw it a big advantage is that the bottom or side of the screw in the lock when the more convenient, freeing a hand to support the products to be locked, and sometimes you can dispense with a positioning fixture (also called jig); their saving hand to take the course and will take the screw driver head screws placed to step in, Guer much more efficient than conventional series increased; and easy replacement of wearing parts of such equipment, key control system is stable and reliable; for the Factory equipment costs consideration, the manufacturer can provide a feed mechanism to pay more than the same time with the screwdriver series, and cost-effective.

Disadvantages: 1. Because the lock beak bigger than the lock, paid for part of the workpiece may affect the line of sight hinder alignment;

2. Applicability is not wide, screw holes around the object does not apply when, in particular screw length is short (usually a percentage of "1.1 not used);

2. Automatic screw machine to send lock

Automatic screw machine to send the lock screw fastening device called the pinnacle of automation equipment, handheld automatically sent to lock in the screw machine automatic feed based on a robot arm or to add another line, table, automatic positioning function is to send the lock TOP screw machine products. Implemented according to customer requirements no one monitoring site, not only saving labor cost and increase efficiency in production assembly.

1. Can be designed as horizontal, diagonal, and in several directions at the same time to send the lock body to meet a variety of production needs;

2. Intelligent continuous feed, fixed torque, can choose to provide the functions of counting, leakage and play features. Screws and slide teeth floating lock detection;

3. The two-position automatic connection, automatic assembly line design can be used without manual transfer of parts, auto parts in place, automatically tighten the screws, auto access to the next process;

4. According to customer product features, design-specific models.

Automatic screwing machine to send a screwdriver under the assembly number can play it for the single-axis automatic screw machines and multi-axis screw machines to play, under the direction of the lock can be divided into pay to play online automatic screw machine, the desktop robot arm automatic screw machine to play, Desktop automatically sent to the lock screw machine, etc., series of products can be tailored according to industrial demand, there is need for such equipment customers can contact the manufacturer for further communication, in order to design and production.

Can simultaneously lock two or more can be referred to as multi-axis, Department of products can be extended from 2 axis to 12 axis, from the stability of the axes is less stable on the high number of axes more chances of failure are relatively high stability somewhat less-axes more reliability requirements of each component on the higher limit for the manufacturers need to rationalize the structural design from the start, to improve the processing accuracy of each fitting, resulting in some additional parts is greater than some add simple algebraic and effect.

In order to enhance efficiency and improve the safety factor in practical use often to locate products made under the model the following: a. before and after the push-pull; b. about mobile; c. Rotating disk; d. line with the step -line.

Multi-axis automatic feed lock screw machine efficiency of the lock screw to an extreme, Ji Benshang machine can be controlled movements time 3 seconds, Hai You were the greatest is available in different Fangxiang achieve Tongshi lock.

A typical application of occasions: when the motor industry in the fixed end cap screw torque on the balance requirement is relatively high, often because the torque in the screw after locking cover minor dislocation caused unbalanced rotor stuck, need to manually adjust tension and light with a plastic hammer light beating. The multi-axis machine is automatically sent to the lock screw such problems can be solved by using the automatic screw machine to send the lock to reduce tedious repetition of manual operation, and fundamentally improve labor efficiency, increase the maximum limit of plant capacity.

In the automotive engine manufacturing process for multi-axis automatic locking screw machine De used to send the most times, Dangran use to automatically send such Chanpin Shang lock screw machine Gongneng to strong Henduo, Qu Dong no longer use Dianpi or Qi batch, using the servo motor, torque, etc. NC.

Disadvantages: To a considerable understanding of the use of the environment, the lock on the workpiece and the torque measurement precision around pay, early research and design time is very important.

Above all to matching the screw device detection, but also matching count, sliding teeth, floating lock detection, torque requirements are standard for the torque can also set the optional digital control system.

About the Author

I am a editor, http://www.hardware-wholesale.com provides resettable combination lock,pachislo slot machine, welcome to visit!

Article Directory Source: http://www.articlerich.com/profile/Allan-Michael-Taylor/45501

Additional Articles From - Home | Business | Careers